Why is my Fanuc CNC displaying the SP9020 SSPA:20 Excess Offset Current V alarm? Steps to resolve the SP9020 SSPA:20 Excess Offset Current V alarm on my Fanuc CNC? How to fix the SP9020 Excess Offset Current V error on a Fanuc spindle?
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
Why is my Fanuc CNC displaying the SP9020 SSPA:20 Excess Offset Current V alarm? Steps to resolve the SP9020 SSPA:20 Excess Offset Current V alarm on my Fanuc CNC? How to fix the SP9020 Excess Offset Current V error on a Fanuc spindle?
SP9020 SSPA:20 EXCESS OFFSET CURRENT V Abnormality in an Spindle Amplifier component is detected. (The initial value for the V phase current detection circuit is abnormal.) Amplifier indicates 20 When encountering the SP9020 SSPA:20 Excess Offset Current V error message, indicating that there is anRead more
When encountering the SP9020 SSPA:20 Excess Offset Current V error message, indicating that there is an abnormality in a spindle amplifier component and that the initial value for the V phase current detection circuit is abnormal, it suggests an issue with the spindle amplifier’s ability to accurately detect and manage current in the V phase. Here’s how to troubleshoot and resolve this issue:
Steps to Troubleshoot and Resolve the SP9020 Error
- Power Cycle the CNC Machine:
- Turn off the CNC machine completely and wait for a few minutes before turning it back on. This can sometimes reset transient errors.
- Inspect Electrical Connections:
- Check all wiring and connections associated with the spindle amplifier, especially those connected to the V phase. Ensure that they are secure, clean, and free from corrosion or damage.
- Examine the Spindle Amplifier:
- Visually inspect the spindle amplifier for any signs of physical damage such as burnt components, loose solder joints, or other visible issues. If damage is detected, the amplifier may need to be replaced.
- Measure the V Phase Current:
- Using a multimeter, measure the current flowing through the V phase circuit. Compare these readings to the expected values to identify any discrepancies that could indicate a fault.
- Check the Spindle Motor:
- Inspect the spindle motor for potential issues, including short circuits, open windings, or other faults that could impact current detection in the amplifier.
- Review Configuration and Parameters:
- Verify that all parameters related to current detection in the CNC’s control settings are correctly configured. Incorrect settings could lead to abnormal readings.
- Replace the Spindle Amplifier:
- If all other checks do not resolve the issue, replacing the spindle amplifier may be necessary. Ensure to follow manufacturer guidelines for replacement.
- Consult Technical Documentation:
- Refer to the Fanuc technical manuals or service guides for specific instructions on diagnosing and addressing this error, or contact Fanuc support for further assistance.
See less