What causes the “SSPA:16 RAM error” on Fanuc SP9016 machines, and how can I resolve it? How can I resolve SRAM errors on Fanuc SP9016 machines, especially SSPA:16 RAM errors?
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
Abnormality in an Spindle Amplifier control circuit component is detected. (RAM for external data is abnormal.) Replace the Spindle Amplifier control printed circuit board Troubleshooting Steps: Power Cycle and Reset: Turn off the machine, wait for a few minutes, and restart it to see if the error pRead more
Abnormality in an Spindle Amplifier control circuit component is detected. (RAM for external data is abnormal.) Replace the Spindle Amplifier control printed circuit board
Troubleshooting Steps:
- Power Cycle and Reset: Turn off the machine, wait for a few minutes, and restart it to see if the error persists. This can sometimes clear temporary errors in the control circuit.
- Inspect Connections: Check that all cables and connectors associated with the Spindle Amplifier PCB are secure, as loose connections can cause memory errors.
- Check Environmental Factors: Excessive heat, dust, or moisture can affect sensitive control components. Ensure the machine environment is clean and within operating temperature.
- Replace the Spindle Amplifier Control PCB: If the error persists, it may indicate a hardware fault in the control circuit’s PCB, and replacing it is likely necessary to restore normal operation.
- Consult Documentation or Contact Fanuc Support: Specific troubleshooting for RAM abnormalities may be covered in Fanuc’s technical documentation, and support may provide model-specific guidance for replacing the PCB safely.
See less