Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How to solve Fanuc Spindle Alarm SP9001?
SP9001 SSPA:01 MOTOR OVERHEAT The internal temperature of the spindle motor exceeds the specified level. The motor is used in excess of the continuous rating, or the cooling component is abnormal. 1 Check and correct the peripheral temperature and load status. 2 If the cooling fan stops, replace it
SP9001 SSPA:01 MOTOR OVERHEAT
The internal temperature of the spindle motor exceeds the specified level. The motor is used in excess of the continuous rating, or the cooling component is abnormal.
1 Check and correct the peripheral temperature and load status.
2 If the cooling fan stops, replace it
How to solve fanuc alarm SP9002 ?
Excessive Motor Load Torque In the SP9002 SSPA:02, one of the common issues faced is the inability of the motor speed to follow a specified speed. This is often due to an excessive motor load torque being detected. To resolve this issue, there are a few steps that can be taken: 1. Check and CorrectRead more
Excessive Motor Load Torque
In the SP9002 SSPA:02, one of the common issues faced is the inability of the motor speed to follow a specified speed. This is often due to an excessive motor load torque being detected. To resolve this issue, there are a few steps that can be taken:
1. Check and Correct Cutting Conditions
The first step is to check and correct the cutting conditions to decrease the load on the motor. This can be done by adjusting parameters such as feed rate, depth of cut, and cutting speed. By optimizing these parameters, the load on the motor can be reduced, allowing it to better match the specified speed.
2. Correct Parameter No. 4082
Another possible solution is to correct Parameter No. 4082, which controls the acceleration and deceleration time. If the acceleration/deceleration time is insufficient, it can cause the motor speed to deviate from the specified speed. By adjusting this parameter, you can ensure that the motor has enough time to reach and maintain the desired speed.
By following these steps, you can address the issue of the motor speed not being able to follow a specified speed and the detection of excessive motor load torque. It is important to carefully analyze the cutting conditions and adjust the relevant parameters to optimize the motor performance.
How to solve Fanuc Spindle Alarm SP9001?
There can be several reasons why the Fanuc Spindle Alarm SP9001 may occur. Some possible causes include: Problems with the spindle motor or drive Electrical issues, such as a loose connection or faulty wiring Malfunctioning sensors or encoders Problems with the spindle control unit or software If yoRead more
There can be several reasons why the Fanuc Spindle Alarm SP9001 may occur. Some possible causes include:
If you encounter the Fanuc Spindle Alarm SP9001, here are some steps you can take to troubleshoot the issue:
Fixing the Fanuc Spindle Alarm SP9001 may require technical expertise and knowledge of CNC machines. It is recommended to consult a qualified technician or contact the manufacturer’s support for assistance. Attempting to fix the issue without the necessary skills and knowledge may result in further damage to the machine.